HPE 599476-002 450GB 10K-RPM SAS 6Gb/s SFF Hard Drive
The HPE 599476-002 is a genuine 450GB SAS Enterprise hard drive built for enterprise storage environments where performance, uptime, and consistent data access matter most. Spinning at 10,000 RPM, it's engineered to keep pace with heavy read/write demand in ProLiant servers, 3PAR storage arrays, transaction processing, and other latency-sensitive deployments. The 6Gb/s SAS interface provides a stable, high-throughput connection between the drive and its host controller, which is exactly what ProLiant Gen8 and Gen9 servers and 3PAR storage systems are built around.
Because this is a genuine HPE component rather than a generic or rebadged drive, it's manufactured to the same tolerances and firmware compatibility standards as the original server or array configuration. That matters when you're replacing a failed drive in a live system — mismatched or unverified parts can cause RAID rebuild failures or degraded performance. The 599476-002's 2.5" SFF chassis is purpose-built to slot directly into compatible high-density drive bays, often including an HP SmartDrive carrier, so installation is straightforward for IT teams managing active infrastructure.
Specifications of HPE 599476-002 SAS Hard Drive
Compatibility of HPE 599476-002 SAS Hard Drive
This drive is built specifically around HPE's server and storage architecture, which means it's designed to work within the storage enclosures and backplanes that were engineered to support SAS interfaces. Before ordering, it's worth double-checking your exact server or array model and backplane revision, since SAS storage systems can vary in supported drive firmware across generations. In general, this drive fits into:
- HPE ProLiant Gen8 Servers (SFF Bays)
- HPE ProLiant Gen9 Servers (SFF Bays)
- HPE 3PAR StoreServ Storage Systems
- SAS 6Gb/s Backplane Enclosures
- 2.5" SFF Drive Bays
Verify Server/Array Model Before Ordering
Why Buy the HPE 599476-002 SAS Hard Drive?
When you're sourcing a replacement drive for an active server or storage array, the difference between a genuine part and an unverified clone shows up the first time you need to rebuild a RAID set. The 599476-002 is HPE-manufactured, which means it carries the firmware and mechanical tolerances your controller already expects — no compatibility guesswork, no risk of a failed rebuild because of a mismatched drive. Here's what makes it worth choosing over a cheaper, unverified alternative:
- Genuine HPE Part
- Fast 10,000 RPM Speed
- Reliable SAS 6Gb/s Throughput
- Includes SmartDrive Carrier
- Hot-Swap Capable
- Proven HPE Engineering
Where to Use the HPE 599476-002 450GB SAS Hard Drive
This drive fits teams maintaining ProLiant server and 3PAR storage infrastructure who need dependable, high-performance storage without downtime. Common deployment scenarios include:
- Enterprise Database Servers
- Virtualization Environments
- Mission-Critical Applications
- ProLiant Gen8/Gen9 Deployments
- High-Performance Storage Tiers
FAQs
Will the HPE 599476-002 work with my existing server or array?
It's built for HPE ProLiant Gen8/Gen9 servers and 3PAR StoreServ systems using a SAS 6Gb/s backplane with 2.5" SFF drive bays, but compatibility can vary by model and firmware revision. It's best to confirm your exact configuration before placing an order.
What is the benefit of 10,000 RPM over 7,200 RPM?
10K RPM drives deliver faster data access, lower latency, and higher IOPS performance compared to 7.2K RPM drives, making them ideal for mission-critical applications and high-transaction workloads.
Does this drive come with a carrier or tray?
Yes, this drive is typically bundled with an HP SmartDrive Carrier (SC), which makes it ready for hot-swap installation in compatible HPE servers and storage systems.